Marhynchus High Pressure SelfSuction Boost Micro Diaphragm Pump, Low Power Consumption, Water Purification, 9kg, Watering Flowers (24V)

1. Possess strong adaptability, the highest temperature is 80 degrees, , alkali , and 2. Adopts good-quality micro self-suction pump head and high-efficiency motor, which has the characteristics of low power consumption, water and energy saving, and 3. The interfaces are all standardized in size, easy to connect, and possess high degree of generalization 4. A cooling fan is installed at the rear of the motor, which can effectively prolong the service life of the motor and slow heat generation 5. Used in industrial equipment, equipment, ships, beverage filling, household cleaning, water purification and water treatment equipment 6. Also suitable for vehicle cleaning, agricultural spraying, artificial fogging, pipeline pressurization, conditioning cleaning, cooling, coal metallurgy, garden spraying, etc. Specification: Item Type: Micro Diaphragm Pump Material: Engineering plastic Type: Self-suction reflux Product Power: 80W Maximum Pressure: 9kg Working Pressure: 5.5kg Opening : 6L/M Vertical Suction Lift: Approx. 1.5meter / 4.9ft Head: Approx. 90meter / 295.3ft Product Application Scenarios: Watering flowers, watering vegetables, spraying, spraying pesticides, etc. How to Use: 1. Connect the pump to the inlet and outlet pipes. It must be ensured that the inlet and outlet pipes are tightly connected to the pump, otherwise it will cause low pressure or water leakage(There are arrows on the pump cover to indicate the direction of water in and out, and the direction of the arrows is the direction of water) 2. Install a filter at the water inlet, and the density of the filter should be above 80 grit (that is, 80 small holes per square centimeter) 3. Connect the micro diaphragm pump to the motor, and the electrical parameters of the connected power supply must meet the input requirements of the motor 4. Turn on the power, the motor pump starts to run 5. Eject the water for 5‑10 seconds, drain the in the pump and pipeline, and wait for the water to stabilize, turn off the power temporarily, connect the water or pump head, etc. 6. Turn on the power to work PackageList: 1 x Micro Diaphragm Pump